No items found.

Tone frequency ranges from 15 Hz to 250 Hz.
Low Pass filter with CutOff control and activation switch.
ADSR for adjusting the temporal evolution in sound amplitude.
Frequency modulation by the Tunnig, Tune, and Depth parameters.
Signal distortion to expand sound possibilities.
Control Voltage (CV) for Tone and CutOff.
Gate for external activations.
Manual Gate for manual activation.
Weird input to modify the Tone by sound modulation.

Power supply: +12V, -12V.
Power consumption: 50mA at +12V, 50mA at -12V.
Audio output signal level Eurorack: 10Vpp for each output.
Horizontal size: 23 HP.
Height size: 3U.
Depth: 35mm from the front panel to the Molex 10-pin connector, 50mm from the knobs to the Molex connector.

LowBlow

Module

The LowBlow is a drum module with an intuitive and minimalist design for easy and fast use. This module encompasses a whole internal synthesis process and consists of various waveform amplitude controls with frequency alteration at different stages, activation inputs for Gate, and Control Voltage (CV) that controls internal module functions. It has an auxiliary output which is a copy of the original signal, both of which have buffers to maintain output stability.

285

Important Note for Purchases:

Estimated delivery time:

30 calendar days

Please be aware that your t-shirt order will only be approved if you purchase a minimum of 3 units, regardless of the specific designs or references chosen. It's essential for your cart to contain at least 3 t-shirts for ZanySignals to process and approve your order. Thank you for your understanding and cooperation!

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Tone frequency ranges from 15 Hz to 250 Hz.
Low Pass filter with CutOff control and activation switch.
ADSR for adjusting the temporal evolution in sound amplitude.
Frequency modulation by the Tunnig, Tune, and Depth parameters.
Signal distortion to expand sound possibilities.
Control Voltage (CV) for Tone and CutOff.
Gate for external activations.
Manual Gate for manual activation.
Weird input to modify the Tone by sound modulation.

Power supply: +12V, -12V.
Power consumption: 50mA at +12V, 50mA at -12V.
Audio output signal level Eurorack: 10Vpp for each output.
Horizontal size: 23 HP.
Height size: 3U.
Depth: 35mm from the front panel to the Molex 10-pin connector, 50mm from the knobs to the Molex connector.

Additional Information